Verint NEXTIVA S2800E series Guida Utente Scaricare il pdf (Pagina 11)

Nextiva S2800e Series Programming Guide Programming the S2800e Camera • 5

The zero compass feature provides a directional title display, a 0-360º

pan reading display and a -2.5º to 92.5º tilt reading display in the format

North 312/35. This feature allows an operator to program and use a

continuous absolute pan and tilt display reading.

To set true North position (Zero Compass):

1. At the camera dome, verify that the camera’s approximate North

position can be viewed and locally panned with a keypad.

2. Using a compass or any other positioning device as a reference,

position the camera of the dome until it is facing true North.

3. Press the Enter key to set this position.

4. The compass title should display N 360/X. N is North, 360º is the

true North setting and X is a fixed null tilt position.

On the 23X/35X (day/night) cameras, you can enable or disable a Flip

Image option. This is used when mounting the dome in an inverted

position. Be aware that certain functions are reversed to compensate

for the image flip.

The PTZ Timeout feature, when enabled, allows the unit to timeout if

manual pan, tilt or zoom is active for a programmable amount of time

from up to 255 seconds. This feature allows you to select an action,

Stop or Preset, when it occurs. When this occurs, a message displays

for two seconds. This will not occur if autopanning or any automatic

function is active.

The Address Setting allows overriding the DIP switch address. When

the address is changed, the dome will reset.

Note: Do not change this value; otherwise you will lose connection with

Nextiva Review.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Nessun commento

Verint NEXTIVA S2800E series Guida Utente Pagina 11