Verint NEXTIVA S2800E series Guida Utente Scaricare il pdf (Pagina 14)

8 • Programming the S2800e Camera Nextiva S2800e Series Programming Guide

The Wide Dynamic Range menu offers a DISABLED or ENABLED

mode. When enabled, the camera will be able to view a wider

difference in light levels in the same scene, for example, if a shady area

and a bright light area are in the same scene.

Note: The S2800e must be set in an Auto Shutter mode in the Shutter

Speed menu for Wide Dynamic Range or any Auto Night Mode

levels to operate.

Wide Dynamic Range and Backlight Compensation cannot be

enabled at the same time.

The S2800e 35X model features image stabilization. The Image

Stabilization menu offers a DISABLED or ENABLED mode. When

enabled, the 35X camera eliminates shaking when zooming in on the

image.

Note: If image stabilization in ON, Motion Detection can not be enabled

and DSS (digital slow shutter) is not available.

Focus Mode allows the autofocus feature to be toggled AUTO or

MANUAL (default is AUTO). However, the most practical way to disable

autofocus is to press either of the Focus buttons on the keyboard. This

will temporarily disable focus until the camera is zoomed in or out

again. When the camera is locked on a subject, autofocus may be

disabled in this manner to prevent it from “hunting” when someone or

something temporarily moves in front of the subject. Hunting occurs

when autofocus is enabled and an object moves closer into the field-of-

view, causing the focus to change from the current image to the new

object. Preset targets do not use autofocus for this reason. Therefore, if

a target is programmed out of focus, it will be out of focus each time

that preset is called.

For 23X/35X cameras in night mode, focus mode automatically

switches to AUTO when a preset is solved.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Nessun commento

Verint NEXTIVA S2800E series Guida Utente Pagina 14